LC Display:
For servicing purposes: 4 rows à 15 characters
4 x cursor, enter, esc and reset keys
Displays configuration data, individual channel names, scaled and linearized measurement values Ethernet interface:
Physical design: RJ45 (8 pol. STP-socket)
10 Base-T (Twisted Pair, 10 Mbps)
Galvanic isolation: 1kV
Protocol: TCP/IP, UDP, ICMP Data storage
Storage partitionable, data compression
Standard: 500kB; max. 96,000 measurement values
Maximum: 1GB; max. 192 million measurement values Serial Ports COM1: RS232 / RS485 interface
Physical design: 9pol. Phoenix Sub-D socket
Switchable interface: RS232/RS485
Baud rate: RS232: 125 kbaud
Baud rate: RS485: 5 Mbaud
Galvanic isolation: 1kV
Protocols: TCP/IP, custom-designed for the connection of modems, PCs, terminals, large displays, ModBus RTU Optional COM1: ProfiBus DP slave interface
In accordance with EN 50170 Vol. 1+2
Physical design: 9pol Sub-D socket
Configuration: GSD files supplied
Baud rate: max. 6 Mbaud COM2: RS232 / RS485 interface
Physical design: 9 pol Sub-D-plug
Switchable interface: RS232/RS485/422
Baud rate: RS232: 125 kbaud
Baud rate: RS485: 5 Mbaud
Galvanic isolation: 1kV
Protocols: TCP/IP, custom-designed for the connection of modems, PCs, terminals, large displays, ModBus RTU Optional Module Bus
Physical design: 2pol. Phoenix plug-in device
Internal bus for the connection of further modules
Galvanic isolation: 1kV
Baud rate: 1 Mbaud Operating system
DelOS multitasking operating system Real Time Clock
Resolution : 100 ms Analog inputs Modules ADTV, ADIT, AAST
Voltage range: ± 156 mV to ± 10V
Current range: 0-20mA and 4-20mA
max. 500 Ω shunt
Thermocouples: all types
Temperature compensation integrated
Resistance thermometer RTD, NTC and linear resistors up to 10 kΩ (not for ADTV)
Resolution: 24 bit maximum
Galvanic isolation: 110 VDC channel <> channel; 750 VDC Channel <> system
Measurement rate: 600 measurements/s/module | Module ADGT
Voltage range: ± 156 mV to ± 110V
Current range: 0-20mA and 4-20mA
(max. 500 Ω shunt)
Thermocouples: all types
Temperature compensation integrated
Resistance thermometer RTD, NTC and linear resistors up to 10 kΩ
Resolution: 24 bit maximum
Galvanic isolation: 650 VDC, 460 VAC channel <> channel; 750 VDC channel <> system
Measurement rate: 60 measurements/s/module Resolution
24 Bit (˜ 7 decimal places) Measurement Accuracy
Voltage /mA: 0,01% of accumulated value
RTD: 0,1 K & 0,01K
Thermocouples: 0,1 to 0,01% of accumulated value
Voltage (ADGT: 110V MB) 0,06% of accumulated value Analog Outputs Modules AAST, ADIT
Resolution: 16 bit
Galvanic isolation: 750V
Output signal: 0-20mA, 4-20mA
Max. shunt: 650 Ω Digital Inputs Modules IOIT, DIOT, OTPT
Galvanic isolation: 2,5kV
Low level: 0..1.5 VDC@ 0-1,5mA
High level: 3..90 VDC@2mA
Protected against polarity reversal Frequency / Counter Inputs Module DIOT
Galvanic isolation: 2,5kV
Low level: 0..1.5 VDC@ 0-1,5mA
High level: 3..90 VDC@2mA
Protected against polarity reversal
Measurement frequency up to 30 kHz with TTL-level Digital Outputs Modules IOIT, DIOT, OTPT
Galvanic isolation: 2,5kV
Switch voltage max. 50 volt, 2.5A DC Module AMDT
Digital Signal Processor (DSP) with local signal memory
8 synchronous / parallel sampling analog inputs (14 Bit, +/- 10 V)
Sampling rate max. 20kHz,
Usable signalband width DC-10 kHz
Triggered recording with a max. of 8192 points (per channel)
Digital filters (low pass / band pass/ high pass) up to the 10th order
FFT analysis (in device) with 100/400/800/1600 lines
Vibration parameters, wide and narrow band
2 analog outputs 0...10VDC
4 status inputs
4 switch outputs |
